CELLO CORP -- DEFOAMER, 581 -- 7930-00N017486
=====================  Product Identification  =====================

Product ID:DEFOAMER, 581
MSDS Date:12/09/1988
FSC:7930
NIIN:00N017486
MSDS Number: BLCKW
=== Responsible Party ===
Company Name:CELLO CORP
Address:1354 OLD POST RD
City:HAVRE DE GRACE
State:MD
ZIP:21078
Country:US
Info Phone Num:301-939-1234
Emergency Phone Num:301-879-4248
CAGE:02176
=== Contractor Identification ===
Company Name:CELLO CORP
Address:1354 OLD POST RD
City:HAVRE DE GRACE
State:MD
ZIP:21078
Country:US
Phone:410-939-1234
CAGE:02176

=============  Composition/Information on Ingredients  =============

Ingred Name:NON HAZARDOUS INGREDIENTS.

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO	Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:SILICONES HAVE LOW TOXICITY OR NONE AT
    AT ALL. LITTLE OR NO IRRITANT EFFECT ON SKIN, INGESTION OR
    INHALATION. POSSIBLE MILD EYE IRRITANT.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:EXISTING DERMATOLOGICAL CONDITION
    MAY BE AGGRAVATED BY LONG TERM EXPOSURE.

=======================  First Aid Measures  =======================

First Aid:EYE:FLUSH WITH WATER FOR AT LEAST 15 MINUTES HOLDING EYELIDS
    OPEN. IF IRRITATION PERSISTS GET MD. SKIN:WASH WITH SOAP AND
    RUNNING WATER. IF IRRITATION PERSISTS GET MD. INGEST:DRINK LARGE
    AMOUNTS OF WA TER. GET MD. INHAL:REMOVE TO FRESH AIR.SUPPORT
    BREATHING (GIVE O*2/ART RESP) .

=====================  Fire Fighting Measures  =====================

Flash Point Method:SCC
Flash Point:NON-FLAMMABLE
Extinguishing Media:FOAM, CO*2, WATER FOG.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA AND FULL PROT
    EQUIPMENT .  COOL CNTNRS W/WATER SPRAY TO PVNT BURSTING & LEAKAGE &
    POSS TOX FUMES FROM PLASTIC CNTNRS ON IGNIT.
Unusual Fire/Explosion Hazard:PRODUCT CONTAINS SILICONE OIL. IF
    SPILLED, AREA WILL BECOME EXTREMELY SLIPPERY.

==================  Accidental Release Measures  ==================

Spill Release Procedures:AREA WILL BECOME EXTREMELY SLIPPERY AND UNSAFE
    FOR WALKING. BLOCK OFF AREA. ABSORB PRODUCT ONTO SAND, SAWDUST OR
    OTHER POROUS MATERIAL. SHOVEL INTO CONTAINERS. SCRUB AREA WITH
    DETERGENT UNTIL FREE OF  PRODUCT AND SAFE FOR WALKING.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT FREEZE. DO NOT EXPOSE
    CONTAINERS TO HIGH HEAT WHICH CAN CAUSE BURSTING OF CONTAINERS, AS
    AREA WILL BECOME EXTREMELY SLIPPERY.
Other Precautions:DO NOT SPILL MATERIAL AS AREA WILL BECOME EXTREMELY
    SLIPPERY.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
    EXPOSURE OF CONCERN .
Ventilation:NOT APPLICABLE.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:EYEWASH STATION.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:200F,93C
Vapor Pres:21
Vapor Density:HVR/AIR
Spec Gravity:1.001
pH:9.0
Evaporation Rate & Reference:SLOWER THAN WATER.
Appearance and Odor:WHITE OPAQUE LIQUID, BLAND ODOR.
Percent Volatiles by Volume:97.5

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
HIGH CONCENTRATIONS OF ALKALINE SALTS.
Stability Condition to Avoid:AVOID HIGH CONCENTRATION OF ALKALINE
    SALTS.
Hazardous Decomposition Products:CO, CO*2.

====================  Disposal Considerations  ====================

Waste Disposal Methods:INCINERATE OR DEPOSIT IN LANDFILL IN ACCORDANCE
    WITH LOCAL, STATE AND FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.